Circuit Schematic learn

Using LM 3909 LED flasher IC , can be designed various electronic projects . As you can see in this circuit diagram , using the LM3909 LED flasher IC can be designed a very simple color organ .

This circuit is not complicated , it use just some common active audio filters for filtering audio signals and a part formed by a LM3909 IC .

All of three active filters drives the audio spectrum into three bands drive rectifiers and then drive IC2,3 and 4 , flashing the LEDs at 6 Hz. D4,D5 and D6 should be three different colors for best effect .
In the table bellow you can see all electronic parts required by this color organ project .

Using the STK4038X audio amplifier IC, can be designed a very simple high power and efficiency audio power amplifier . This circuit is manufactured by Sanyo Corporation and will provide a output power of 60 watts on a 8 ohms load or 4 ohms load with 0.008% distortion .

The output power that is provided by this audio IC , can be more higher , but with more distortion.
If you will use a 8 ohms load you must power this audio amplifier project from a dual +/- 40 volts DC power supply and if you’ll use a 4 ohms load you must power this audio project form a dual +/- 33.5 volts DC power source.
To prevent over heating the STK4038X audio power IC must be heatsinked on a good heatsink .
Also you must use a very well filtered power supply ( a 10000uF capacitor will be fine for this audio project) .