Circuit Schematic learn

The chip on which the amplifier is based, a Type LM3876, is a member of the Overture family from National Semiconductor, All members of this family are pin-compatible and mutually interchangeable. They are typified by an internal protection (called SPIKE). In practice, the diftection ference between them is the power output. The series was described on the basis of the LM3886 in an earlier issue*.

The PCB has been designed so what it can accommodate the LM3876 (50W) as well as the LM3886 (150W). Because of this, pin5 of the IC on the board is connected to the positive supply line. This connection is not needed for the LM3876, since its pin5 is not (internally) connected (NC).

The IC is located at the side of the board to facilitate fitting it to a heat sink as shown in the photograph.

An important aspect for optimum performance is the decoupling of the unregulated supply lines by C 7-10. All earth connections go to a single terminal on the board.

Air-cored inductor L1 consists of 13 turns of 1mm dia. enamelled copper wire with an inner diameter of 10mm. The completed inductor is pushed over R7 and its terminals soldered to those of the resistor.

All electrolytic capacitors must be mounted upright. The amplifier can be muted with a single-pole switch connected to the MUTE input (pin8). This function is enabled when the switch is open. If muting is not required, solder a wire bridge across the mute terminals on the board.

Boucherot network R6-C6 is not normally required in this application, but provision has been made for it for use in other applications.

According to the manufacturers, both chips are optimalized for a load of 8 Ohm. The output power is lower when a 4 Ohm load is used or when the supply voltage is reduced. When a 4 Ohm load is used, the SPIKE protection becomes active when the supply voltage is about 27V, resulting a in a reduction of the power output to 10W. This means that it is not advisable to use loudspeaker with an impedance <8 ohm.

For best result you can expand power amplifier using BPA-200 Amplifier

---

Part listResistor:
R1, R3 = 1 k
R2, R4, R5 = 18k
R6 = see text
R7 = 10R, 5 Watt
R8, R9 = 22k

Capacitors:
C1 = 2.2 uF
C2 = 220 uF, 160 V
C3 = 22 uF, 40 V
C4 = 47 pF
C5 = 100 uF, 40 V
C6 = see text
C7, C8 = 100 nF
C9, C10 = 1000 uF, 40 V

Inductors:
L1 = 0.7 uH - see text

Integrated circuits:
IC1 = LM3876T

Miscellaneous:
Heat sink for IC1 <1.5 k w-1
Single-pole switch - see text
Schematic and PCB Layout LM3876

 A good business is not really the appreciation of the work and marketing tool received suffering from markets and telephone product of the strength is the key to victory, of course, low comprehensive

listing of G808 last year continue to allow me to appreciate the dance of the Samsung. It is the process and result of performing every operational instruction of

cell phone jammer .
The replacement phone of HTC product cycle is very fast, almost did not take long on a machine Huang. HTC family of Windows machines Huang HTC HD3, do not know yet listed. While Android is in fact

the front is not long, nothing more than the G3, the Hero. I think for many people, especially Chinese people do not want to play the machine to send messages to call you taking pictures, do not

buy the HTC. If you have a business role, the entertainment capital of the class you want to see the movie, send email, browse the World Wide Web, play a large 3D games. Then you consider that HTC

well. The most important thing is that the HTC machine hardware configuration is very good, and that old-fashioned Nokia is completely different. To show the detailed status of

cell phone jammer .
I saw a little boy says: Im gay, I use the M8 - and then immediately replied: do not lose our gay face on the cnbeta. Now is not a phone as small as possible. You go to Europe and the United

States to take a look at those famous models, they go on the street holding his hands a large mobile phone to send text messages there. Looks super Fan children. - Suitable for girls with Sharp a

lot of heads are not small, is said to hand a small little girls no way to single-handedly control the Sharp. I phone is very large, two hands to get maintained, BlackBerry texting should at least

use two hands. - On the trend of mobile phones the size of argument, I am more biased in favor of mobile phone now or bigger only decent. The system administrator can screen cell phone jammer .
Millet mobile marketing strategies and models dismantling. Presentation online site finishing. Introduction: the popularity of millet phone and the millet mobile phone marketing strategy is

inseparable from millet phones with what kind of marketing strategy?